Sawo's wide range of wall-mounted stainless steel 'remote-control' stoves!
All light commercial stoves require a separate Control Panel, see below:
For larger Commercial stoves, see Full Commercial Stoves
Commercial Stoves & Control Panels
Sawo's Savonia Stoves are free-standing heavy-duty stoves, all designed and built specifically for operation in the tough Commercial environment
Savonia Stoves and the light-duty 'Scandia' models all feature Sawo's 'trade-mark' modern good looks; strong, all Stainless-Steel construction; screw-adjustable feet, and large stone capacities; all are designed with specially water-resistant electrical areas.
When the going gets tough - they keep going!
A bonus - there’s no 'front' or 'back'! Savonia stoves look the equally lovely from all sides, allowing these superb stoves to be a pleasure to the eye in any sauna configuration.
This is an important benefit - Sawo's Stainless Steel Stoves are often used to replace rusted-out old-style stoves in existing sauna rooms.
(Note that all Commercial Stoves require a separate Control Panel)
Light Commercial Stoves
Full Commercial Stoves
Free-standing stainless-steel stoves from 9 to 24kW specifically for saunas in commercial service.
They all require separate Control Panels, see below:
Perfect for the Commercial environment.
For smaller Commercial stoves, see Light Commercial Stoves
LOWEST PRICED FULL COMMERCIAL SAUNA STOVES OF THIS QUALITY AVAILABLE IN THE UK!
Commercial Control Panels
These sophisticated modern electronic control-panels are designed to be installed with, and control, the Sawo's range of Sauna Stoves for Remote Control
For advice on replacement Control Panels, please click HERE
Need to replace a Control Panel?
Need to replace a Control Panel? This section will help you to select the correct type from our range of Control Systems. All are quickly available from stock
Note that when replacing a Control Panel, the Sensor Unit (inside the Sauna) must also be replaced. Sensors are included with all our Control Panels.
YOU (AND WE) WILL NEED TO KNOW:
1) The Brand (manufacturer's name) and Model or Type number of the Control Panel - this information is usually easily found on the Panel itself
2) The Brand, Model or Type number, and kW power of the Sauna Stove being controlled - this will usually be found on the maker's plate on the stove (not on the Control Panel).
Click here for more information about maker's plates
3) The type of electrical supply to the Control Panel - is it:
Single Phase (220-240 volt household-type supply)
or
Three-phase (380-415 volt commercial type)
4) The type of output to the Stove - is it by:
Just 3 wires (Live, Neutral and Earth only)
or
More than 3 wires - if so, how many and what type?
SELF-SELECTION:
If Brand of Control Panel or Stove is SAWO, refer to the appropriate section of our website where the product will be found, together with its Installation Manual (by download) The correct type of Control Panel will be mentioned in the product description for Stove, Panel, or both.
Click HERE to view all of Sawo's UK Stoves & Control Panels
Important: Ensure correct Connecting Cable is used between Control Panel and Stove! Damage may be caused by use of incorrect cable - such damage is not covered by warranty. Click HERE to see full details of Connecting Cables
If supply is Single Phase, Stove is 8kW or below, and output by more than 3 wires, ASV3-15 Control Panel will usually be correct. This type can accept single-phase (3-wire) input; it must output to the stove by 7 wires (3x live, 3x neutral, 1x earth) It must not output to the Stove by 3 wires. Non-warrantable damage will result if output is by only 3 wires.
Click HERE for full details of ASV3-15 Control Panel
If supply is Single Phase, Stove is 9kW or below, and output by only 3 wires, type NOK33PS-1 Control Panel will usually be correct. This type accepts only single-phase (3-wire) input; it outputs to the stove by 3 wires (1x live, 1 x neutral, 1 x earth). Not suitable for 3-phase input. Not suitable over 9kW.
Click HERE for full details of NOK33PS-1 Control Panel
If supply is Three Phase and Stove is 15kW or below, ASV3-15 Control Panel will usually be correct. This type can accept three-phase input and will usually output in the correct configuration to suit the 3-phase stove being controlled.
Click HERE for full details of ASV3-15 Control Panel
If supply is Three Phase and Stove is over 15kW (max 24kW), ASV3-15 Control Panel with additional Power Unit will usually be correct. This type can accept three-phase input and will usually output in the correct configuration to suit the 3-phase stove being controlled.
Click HERE for details of this arrangement
Important: Ensure correct Connecting Cable is used between Control Panel and Stove! Damage may be caused by use of incorrect cable - such damage is not covered by warranty. Click HERE to see full details of Connecting Cables
If unsure - please call during office hours on FREEphone 0500 432 132 and ask for Technical Advice
(Cover picture: This Control Panel was installed inside the Sauna!)
Need Help, Advice?
Unique in Britain, we offer THE BEST PRICES for THE WIDEST RANGES with FAST DELIVERY from our own HUGE STOCKS!
Call FREE on 0500 432 132 for advice, information, or to order by phone - we're happy to help! ORDER ON-LINE NOW!
Read more or get in touch »




