Sawo's 'STR' Domestic & Light Commercial Steam Generator range contains models at 4.5, 6.0, 7.5, 9.0 and 12.0 kW.

(Note: New 'STS' models will be progressively introduced through 2008)

All models up to 9kW are designed for single-phase (220-240V) household-type power supply; there is also a 9kW model available for three-phase (380-415v) supply.

Models from 12kW and upward are built only for three-phase (380-415v) supply.

For full commercial applications see the STC range (click here)

The stylish and versatile Control Panel may be mounted either inside or outside the Steam Room, and is fully pre-wired to a pre-fitted plug - as is the steamroom temperature sensor, ensuring quick and easy installation.

Heavy Commercial models are also available, in 12.0 and 18.0kW sizes; click HERE for details of these types

Prices include:
- The Steam Generator itself, complete in its smart Stainless Steel casing, as shown at right
- The Control Panel (which can be mounted inside or outside the Steam Room) - seen at right
- The SteamRoom Temperature Sensor and Cable - seen at right
- The Steam Head (the outlet fitting to disperse the steam into the Steam Room) in heavy chromed brass, complete with integral 'essence cup'
- Full Installation and Operation Instructions - also downloadable from this page

All that is needed to complete the installation is ordinary copper pipe, ordinary hot-water pipe-lagging, and ordinary electrical wiring. (All electrics should, of course, be fitted by a properly qualified professional Electrician)

Sizing:

4.5kW for 'warm construction' steamrooms up to to 5.5 cubic metres
6.0kW for 'warm construction' steamrooms from 4 to 13 cubic metres
7.5kW for 'warm construction' steamrooms from 5 to 18 cubic metres
9.0kW for 'warm construction' steamrooms from 12 to 24 cubic metres
12 kW for 'warm construction' steamrooms from 20 to 30 cubic metres

Note: For 'cold(er) construction' steamrooms (e.g those built of uninsulated masonry, concrete blocks, brick, stonework etc) divide the cubic-metres by up to two; e.g. a 9.0kW unit may only be suitable 6 to 12 cu.m. in the case of a mainly uninsulated room.

It is usually best to select a unit that will be working 'easily' - as against one that will be working at or near the upper limit of its capacity range.

Two Sawo Steam Generators can be connected to work together using a Tandem Cable (also see below)

The optional 'Auto-Drain' unit will automatically drain the Steam Generator after it has cooled, then automatically re-fill it at the next activation - thus ensuring the freshest of water for each steambath and minimising scale build-up. The Auto-Drain unit (picture at right) is supplied ready wired with a plug for the Steam Generator's socket - thus installation is very easy. Recommended - especially in hard-water areas.

Note: In hard-water areas, performance will be maximised - and maintenance minimised - by feeding the Steam Generator via a Water Softener

For Technical, Installation and Operating Information:
Please download the Steam Generator Manual using the link below the pictures at right >

For more heavily used commercial applications, and for any other information, please call UK Freephone 0500 432 132 during normal office hours, or by email via the 'Contact Us' page

Prices (inc VAT):

Item Name	Code	Price
To see delivery costs 'Add' any mix of products to your Basket
Single-Phase Steam Generator 4.5kW	STR45-1	£895.00
Single-Phase Steam Generator 6.0kW	STS-60-1 (Replaces STR60-1)	£945.00
Single-Phase Steam Generator 7.5kW	STR75-1	£995.00
Single-Phase Steam Generator 9.0kW	STR90-1	£1095.00
Three-Phase Steam Generator 9.0kW	STR90-3	£1145.00
Three-Phase Steam Generator 12.0kW	STR120-3	£1195.00
Auto-Drain Unit for all STR models	HP11-001	£195.00

More products in Steam Room Equipment & Doors »

5 Related products: