** NOW FEATURES SAUNA TEMPERATURE DISPLAY! **

The sophisticated modern ASV3-15 electronic Control Panel is designed to be installed with, and control, Sawo's wide range of Sauna Stoves built for Remote Control:

Up to 8kW on 220/240v single-phase (household type) supply; and

Up to 15kW (and also up to 24kW, with optional additional Power Units) on 380/415v three-phase (commercial type) supply.

Sawo 'Remote' Control Panels have several additional features and benefits not found on 'Built-In Control' type stoves:

- Digital Display of Actual Sauna Temperature / Current Time Delay
- The safety and convenience of eye level operation outside the Sauna itself.
- Coloured LED Status Indicator Lights showing Mains Supply and Heating System status
- Automatic self-Diagnostic Testing of sensor circuits (every time the sauna is switched on) with specific display messages in the vent of a fault being detected.
- Up to 24 hours 'delay start' (built in controls only allows 8hrs)
-'Delayed Start' Time Remaining is displayed by 4-digit LED Display
- Automatic Switch-off after 6 hours (Sauna may be restarted at will)
(Automatic Switch-off may be changed to 12 hours during on-site installation)
- Sauna Light Switch and Lighting Fuse
- Overheat Cut-Out by Thermal Fuse

The option to mount the sauna controls where they can not be tampered with, e.g. behind a locked door, in a control centre or high up out of reach

'Remote' Control Panel ASV3-15 is connected to:
- The incoming Mains Supply (wiring to be specified and provided by your electrician)
- A small Sensor Unit mounted inside the Sauna - the sensor itself and the special cables (3m length) for connecting it are included with ASV3-15 (Extend sensor wires using HTFS )
- The Sauna Stove itself, using connecting cable HTF7
- The Sauna's internal light/s, using cable/s type HTFL
Lighting Circuit Capacity: 1 Amp (appx 230 Watts)
CE Approval: Sawo Control Panels are fully CE Approved

CONNECTING CABLE TO STOVE AND LIGHT:
Connecting Cable to Scandia NS Stainless Stoves (and Economy Stoves for Remote Control) is 'HTF7'
(7-core flexible cable) - this is available from SaunaShop
For Lighting use High Temperature Flexible Cable 'HTFL'
Click HERE for details of High Temperature Flexible Cables

Connection to Full Commercial Stoves over 9kW should be made by electrician's 'hard wiring' on site

INSTALLATION MANUAL:
Click the link below the pictures at right, this will deliver the full Installation Manual in .pdf format via 'Adobe Acrobat' (free download)

For further advice and information on selecting the correct Control Panel, Wiring, and Stove, please call our UK FREEphone 0500 432 132 - please ask for 'Technical Advice' - we'll be happy to help!

Price (inc VAT):

Item Name	Code	Price
To see delivery costs 'Add' any mix of products to your Basket
ASV3-15 Digital Control Panel	ASV3-15	£225.00

Features:

• Domestic: High specification Luxury Control Panel
• Commercial: Meets the requirement to mount the sauna controls where they cannot be tampered with!
• Connectable to 230v Single-phase (UK Household type supply) via Single-phase Adaptor Kit (included) for stoves up to 8.0kW. (7-core cable HTF7 required)
• Connectable to 3-phase (Commercial) supply for Scandia NS stoves from 4.5kW to 9.0kW (7-core cable HTF7 required)
• Connectable to 3-phase (Commercial) supply for Savonia Stoves up to 15.0kW

Suitability:

• HTFL Domestic: High specification Luxury Control Panel
• Commercial: Meets the requirement to mount the sauna controls where they cannot be tampered with!
• Connectable to 230v Single-phase (UK Household type supply) via Single-phase Adaptor Kit (included) for stoves up to 8.0kW. (7-core cable HTF7 required)
• Connectable to 3-phase (Commercial) supply for Scandia NS stoves from 4.5kW to 9.0kW (7-core cable HTF7 required)
• Connectable to 3-phase (Commercial) supply for Savonia Stoves up to 15.0kW

More products in Control Panels (required for 'Remote' type Stoves above) »

11 Related products: