These sophisticated modern electronic control-panels are designed to be installed with, and control, the Sawo's range of Sauna Stoves for Remote Control.

Sawo 'Remote' Control Panels have several additional features and benefits not found on 'Built-In Control' type stoves:

- The safety and convenience of eye level operation outside the Sauna itself.
- Coloured LED Status Indicator Lights showing Mains Supply and Heating System status
- Automatic self-Diagnostic Testing of sensor circuits (every time the sauna is switched on) with specific display messages in the vent of a fault being detected.
- Up to 24 hours 'delay start' (built in controls only allows 8hrs)
-'Delayed Start' Time Remaining is displayed by 4-digit LED Display
- Automatic Switch-off after 6 hours (may be renewed at any time)
(Automatic Switch-off may be changed to 12 hours during on-site installation)
- Sauna Light Switch and Lighting Fuse (1 amp circuit - appx 230 Watts)
- Overheat Cut-Out by Thermal Fuse

- and the option to mount the sauna controls where they cannot be tampered with by bathers, e.g. behind a locked door, or in a control centre - this is essential 'good practice' for any Commercial Sauna.


Your control panel is designed to be connected to:
- A small Sensor Unit mounted inside the Sauna (the Sensor and its special cables are included with the Control Panel);
- The incoming mains supply, via wiring provided by your electrician;
- The Sauna Stove itself, via suitable connecting cable (see below);
- The Sauna's internal light fitting/s, via suitable connecting cable (see below).
- (for stoves over 15kW) additional Power Units S2-18 or S2-30

CONNECTING CABLE TO STOVE AND LIGHT:
Connecting Cable to Scandia NS Stainless Stoves (and Economy Stoves for Remote Control) is "HTF7" (7-core flexible cable) - this is available from SaunaShop
Click HERE for details of High Temperature Flexible Cables

Connection to Full Commercial Stoves over 9kW (e.g. Savonia, Super Savonia, Super Savonia V12)should be made by electrician's 'hard wiring' on site

CE Approval: All Sawo Control Panels are fully CE Approved

Note: Model AS21-15 has been phased out in favour of ASV3-15, which has the advantage of being able to use single-phase supply (to 8kW max), as well as 3-phase to 15kW.

By also connecting Additional Power Unit S2-18 or S2-30, ASV3-15 (with the S2 Unit) can be used for Sawo Commercial Sauna Stoves up to 24kW. See the pricetable below:

Prices (inc VAT):

Item Name	Code	Price
To see delivery costs 'Add' any mix of products to your Basket
Control Panel ASV3-15 (1 or 3-ph to 15kW)	ASV3-15	£225.00
3 Phase S2-18 Additional Power Unit for 18 to 21kW	S2-18	£225.00
3 Phase S2-30 Additional Power Unit for 24kW	S2-30	£225.00

Features:

• For 9 - 15kW: Use the ASV3-15 Control Panel
• For 18 - 21kW: ASV3-15 and S2-18 Power Unit are both required
• For 24kW: ASV3-15 and S2-30 Power Unit are both required

Suitability:

• Commercial and/or Larger Saunas

More products in Commercial Control Panels »

4 Related products: